2017-01-18

Nepcon Japan 2017 Starts: Light Tech EXPO Focuses On New Applications of Light Sources and UV LED

Nepcon Japan 2017, dashingly large and vibrant, hosted expositions regarding diverse technology of up to 15 fields that are intertwined with one another. Considered as the biggest trade show ever hosted, it invited 2,270 manufacturers, both international and local Japanese companies, for the showcase of R&D and electronics manufacturing technologies. Apart from Nepcon Japan 2017, the longest-running main show consisting of 6 expositions, LED/OLED Lighting Technology Expo –Light-Tech–, WEARABLE Expo, RoboDEX Expo and Smart Automotive Factory Expo are also the highlights of this year. The AUTOMOTIVE WORLD covers the most-discussed automotive technologies, including car electronics, EV/HEV/FCV technology, connected car technology, lightweight techniques, and processing. 
Continue reading
2016-11-22

SSL China 2016: Nobel Laureate Shuji Nakamura Upbeat about Outlook of Micro-LED, Laser Lighting, LiFi Technologies

The 13th China International Forum on Solid State Lighting (SSLCHINA 2016) and 3th International Forum on Wide Bandgap Semiconductors China(IFWS)were held in Beijing International Convention Center from November 15 to 18, 2016. The forums and conferences realized China’s 13th Five- Year Plan by providing strategic highlights of electronic material projects. LEDinside has summarized talks of professionals and experts in each area, including Micro LED, Laser lighting, VCSEL, Li-Fi Communication, smart lighitng and well-being lighting.
Continue reading
2016-11-22

SSL China 2016: Wide Bandgap semiconductors (WBGs) Boosts High Pressure and High Speed Market Demand

The 13th China International Forum on Solid State Lighting (SSLCHINA 2016) and 3th International Forum on Wide Bandgap Semiconductors China(IFWS)were held in Beijing International Convention Center from November 15 to 18, 2016. The forums and conferences realized China’s 13th Five- Year Plan by providing strategic highlights of electronic material projects. LEDinside has summarized talks of professionals and experts in each area, including Micro LED, Laser lighting, VCSEL, Li-Fi Communication, smart lighitng and well-being lighting.
Continue reading
2016-11-14

Edison Opto Shined in Hong Kong International Lighting Fair 2016

  The biggest lighting industry event, Hong Kong International Lighting Fair (Autumn Edition), ended successfully on 30th of October. During the event, there were more than 2,661 exhibitors from 37 countries and regions, including 146 Taiwanese exhibitors. Edison Opto also showcased smart-lighting-related AC modules and new COB series which used the latest TM-30 technique to attract customers’ attention.
Continue reading
2016-06-22

Brightek Showcases All Series Automotive LED Lighting Products in Shanghai

Brightek entered the automotive LED lighting market in 2007, and all its high power LEDs are manufactured in Taiwan, while its low to mid-power LED products are produced in Shenzhen, China. The company is a 10-year veteran on the market and provided clients with many interior and exterior automotive lighting solutions including brake lights, Compound Rear Lights (CRL), Daylight Running Lights (DRL), turn lights, and decorative lights. The company is working closely with clients in R&D and product certification.
Continue reading
2016-06-22

Lite-On's Intelligent Energy Saving Product Portflio Wows Visitors at Int’l LED Lighting Exposition 2016

Lite-On Technology Corporation remains to be competitive and continuingly offers up –to-date products and service to clients by seamlessly tracking the market development. Under the theme of “intelligent Energy Saving”, Lite-On showcased varied product ranges, including automotive lighting, smart manufacturing, wearable tech, home automation and intelligent medical system as solutions for IoT applications at the Int’l LED Lighting Exposition, which took place in June 15-17 at TWTC Nangnag Exhibition Hall in Taipei. LEDinside had the opportunity to interviewed Sander Su, Director of Global Sales Marketing , Electrical and Electronic Manufacturing (Automotive electronics) on the company’s products and strategic planning.
Continue reading
2016-06-20

Manufacturers of LED chips and LED packages at Guangzhou International Lighting Exhibition 2016

The breadth and depth of exhibited products was significantly improved at the Guangzhou International Lighting Exhibition (GILE) 2016, which took place from June 9-12 at China Import and Export Fair Pazhou Complex, Guangzhou, China as it served as a comprehensive platform for exhibitors and buyers while providing all-in-one purchase platform of lighting equipment, LED packages, technology and applications to buyers. Besides developing an integrated platform at the exhibition, the show organizers also assisted manufacturers in building partnerships, and providing buyers with a one-stop shopping platform that encompasses lighting equipment, LED package, and new LED technologies.
Continue reading
2016-06-20

High-end Commercial LED Lighting Sees Growing Penetration Rate as Market Favors Optimal Light Quality

The ongoing improvement of efficacy, competence of SDCM control and color rendering index in LEDs accelerate high-end commercial lighting market’s development that demands higher light quality. High-end commercial lighting market mainly include museum, galleries and other exhibition lighting applications that primarily use downlights, projectors and reflectors.   LEDinside, a division of TrendForce, reports in its “High-end commercial and track lighting market” that the market scale of two frequently used luminaires for high-end commercial lighting, namely Downlight and Projectors and Reflectors (Par& Rs.) separately reaches US $1.88 billion and US $1.54 billion in 2016. It’s projected that the market scale of Downlight is to reach US $2.01 billion and Projector and Reflectors at US $1.59 billion in 2017.
Continue reading
2016-06-17

Lekise Seeks Int’l Business Opportunities at GILE 2016

Main players in the LED industry, and large volume of visitors attended the annual Guangzhou International Lighting Show 2016, which runs from June 9-12. Although, fewer big lighting brands from U.S., Europe and China attended the show this year, there were plenty of newcomers. Many are focused on the international market, and plenty of manufacturers are hoping to use the platform to increase their exposure in China and the international market.
Continue reading
2016-06-15

Exclusive Interview with WELLMAX CEO Yamin Wang at GILE 2016

Guangzhou International Lighting Exhibition has become a wide platform for global LED lighting companies to seek partnership and customers. In this year’s exhibition, it can be observed that a growing number of large LED lighting vendors who target foreign markets participated in the show, with WELLMAX being one of them. During the exhibition, LEDinside had the opportunity to interview with Mr. Yamin Wang, CEO of WELLMAX, about the current status and development strategies of the company.
Continue reading
2016-06-13

Outdoor Construction Lighting Market Drives Chinese Lighting Market Growth

The extent and depth of exhibitions was escalated at The Guangzhou International Exhibition 2016, which runs from June 9-12, 2016 at China Import and Export Complex. Besides developing an integrated platform at the exhibition, the show organizers also assisted manufacturers in building partnerships, and providing buyers with a one-stop shopping platform that encompasses lighting equipment, LED package, and new LED technologies.
Continue reading
2016-06-13

Breakthrough, Innovation and New Way of Living is to be Introduced to Lighting Industry- GILE 2016

The breadth and depth of exhibited products was significantly improved at the Guangzhou International Lighting Exhibition (GILE) 2016, which took place from June 9-12 at China Import and Export Fair Pazhou Complex, Guangzhou, China as it served as a comprehensive platform for exhibitors and buyers while providing all-in-one purchase platform of lighting equipment, LED packages, technology and applications to buyers.
Continue reading
2016-06-06

ITRI Showcases Micro-LED Technology at Computex 2016

Apple has been the main driver behind many new technology advancements, OLED technology has come under media center spotlight spurred by market rumors about upcoming OLED touchpad panels in the MacBook Pro, and curved screen smartphones. Contending display technology micro-LED has somewhat faded into the background.
Continue reading
2016-06-06

ITRI’s Smart Integrated Solutions Displayed at 2016 Computex Taipei

A full body 3D scan can be completed in less than one minute with ITRI's incredible "High Precision Automated 3D Scanner." And then there is the virtual piano, enabling lovely melodies to be played on a desktop using "VR 3D Gesture UI." Furthermore, the "Pocket Chopstick Sanitizer" can kill 99.99% of pathogens through the compact UVC LED light disinfection module in just 90 seconds. These are just three of the 14 smart city-themed innovative technologies that ITRI exhibited at its pavilion at 2016 COMPUTEX Taipei. ITRI will display what can be achieved through smart systems integration, helping to provide industry with total solutions that can drive industrial transformation, while promoting the development of smart cities. 
Continue reading
2016-06-03

LEDinside: Chinese Automotive LED Penetration Market Analysis / EU & US Car Supply Chain

China Chinese automotive light’s development is still price-oriented when adopting LEDs. Current spec for interior automotive lights and RCL are similar with lighting LEDs and even backlight LEDs, the LED penetration rate is relatively high and similar to international level. As DRL is closely linked to the recognition of vehicles, it has seen rapid development in Chinese market over the past few years. Moreover, some Chinese automotive makers turn to low-power LEDs for DRL applications. Therefore, the market penetration of DRL in China rose to 47% in 2016.   Slow mid and high-power LED in Chinese automotive market: Due to the high technical requirement of high-power LED product segments, such as high / low beam and fog light. These light sources are mainly from international source and have low penetration rate.   US Car Market Supply Chain US automotive makers mainly adopt automotive lamps from Visteon and Hella. As North America is notorious for its tariff protection, automotive lamp factories and modules are constructed relatively close to each other, focusing on market opportunities and the reduction of assembly costs. Mexico is a popular location of such plants over the past few years.  As the suppliers of headlamps and tail lamps are not necessarily the same, the main concern lie in design and mass production ability. Meanwhile, the suppliers of tail light and interior lights are usually the same as the technical difficulties is relatively low and can be potentially purchased together.
Continue reading
2016-05-31

UV LED Manufacturers Showcased Up-to-date Applications at OPIE’ 16

Many leading manufacturers that provide innovative technology displayed their up-to-date solutions at OPIE’16, which took place from May 18 - 20 in Yokohama, Japan. OPIE’16, which was jointly held with LASER EXPO 2016, IR-UV EXPO 2016, Space & Astronomy EXPO 2016, LENS EXPO 2016 and Optical Measurement & Positioning EXPO 2016, also co-located with the new Micro & Nano EXPO 2016.
Continue reading
2016-05-26

UV Curing Market Opportunities and Challenges Observed at RadTech UV+EB 2016

In this article LEDinside will address market opportunities observed for UV curing applications at RadTech UV+EB 2016, which took place a week ago in Chicago, U.S. In this series LEDinside has covered UV LED package, epoxy resin, photoinitiator, related materials, and module applications.
Continue reading
2016-05-25

New UV LED Package Product Trends at RadTech UV+EB 2016

LEDinside had an opportunity to speak to top UV LED manufacturers at RadTech UV+EB 2016, which took place from May 16-18 in Chicago, U.S. this year. A lot of UV LED manufacturers launched their products at the show, which can be classified into three major technologies UV LED package, epoxy resin, photoinitiators, and other related materials and modules.
Continue reading
2016-05-24

HPL Provides Optimized UV LED Curing Solution

Many manufacturers displayed advanced UV LED curing and disinfection technologies at RadTech UV 2016, which recently took place from May 16-18 in Chicago, U.S. The leading UV technology show integrates forums and exhibitions, and is an important indicator in the sector. Dr. Ming-chang Wu, Vice President of High Power Lighting Group (HPL) spoke to LEDinside about the company’s UV LED product trends and solutions.
Continue reading
2016-05-20

Experts at RadTech 2016 Outlook for the UV LED Sector

Many manufacturers and industry leading UV curing and disinfection specialists seeking comprehensive system solutions attended RadTech UV 2016, which took place in Chicago, U.S. from May 16-18, 2016. The exhibition hosts both forums, while showcasing innovative UV products, making it a leading indicator in the UV sector.
Continue reading
2016-04-29

LED Filament Bulbs a New Meme for LED Lighting Projects and Tenders-Show Report LED Expo Thailand 2016

Many products being showcased at LED Expo Thailand 2016 that took place from April 19-22, 2016 in Bangkok attracted more attention than others. Filament LED bulb is one of the most popular items, though it has only been introduced to the market a few years ago. Be it Taiwanese manufacturers, Chinese luminaire makers, Thai manufacturers and foreign companies   such as Philips, the launch of filament LEDs washed over Thailand’s lighting market. Aside from local labels that had entered the well-known local channel, HomePro, buyers are mainly distributors, contractors and tenders.
Continue reading
2016-04-28

Market Expansion Strategies of Taiwanese Manufacturers- Show Report LED Expo Thailand 2016

LED Expo Thailand 2016 that took place from April 19-22, 2016 at IMPACT Exhibition and Convention Center in Bangkok, Thailand is the largest LED exhibition held in southeast Asian district. Compared to Singapore’s economic role as a hub, the Thailand-based LED exhibition emphasizes more on creating business opportunities for local manufacturers and international ones. Buyers are mainly local Thai manufacturers, foreign investors that focus on southeast Asian market as well as district distributors. Quite a few buyers are based in Vietnam and Singapore. Vietnam, at the same time, is also one of Taiwanese manufacturers’ targeting markets.
Continue reading
2016-04-28

FSP to Unveil Customized Lighting Solutions at Lightfair 2016

As one of the top five power supply vendors worldwide, FSP Group has built up many years of experience in the LED lighting sector. At this year LIGHTFAIR International (LFI) in San Diego from April 26 to 28, FSP will present its wide range of products related to outdoor industrial lighting, smart lighting and firmware solutions. The event will also mark the official entry of the company’s customized lighting solutions to the U.S. market.
Continue reading
2016-04-26

ASEAN Countries Expect Booming Demand in LEDs- Show Report of LED Expo Thailand 2016

The rapid growth of Southeast Asia market has always been attractive to investors while local exhibitions create collaboration and partnership opportunities for foreign manufacturers taping into the market. This year, Energy efficient technologies were added to the LED Expo Thailand 2016 that took place from April 19-22, 2016 at IMPACT Exhibition and Convention Center in Bangkok, Thailand, including solar power, energy efficient products. Meanwhile, LED and lighting related exhibitions found exhibitors from southeast Asia, including Japan, Korea, China and Taiwan.
Continue reading
2016-04-20

CEA LETI: Micro-LEDs Future Applications and Current Challenges

Micro LEDs are gaining traction in the LED industry since it is a technology that industry experts view as capable of breaking LCDs low light efficiency, and achieve “real LED display” technology. Current LCD designs are very inefficient in light output, with only an estimated 10% light emission. Light emitted from the LED backlight module has to travel through polarization filters, TFT, liquid crystals, and color filters, about 90% of light is trapped in these layered structures.
Continue reading
2016-04-20

LED Luminaire Design Trends at TILS 2016

Several notable trends LEDinside observed at Taiwan International Lighting Show (TILS) 2016, which took place at Nangang Exhibition Hall from April 12-16, 2016 in Taipei, was more manufacturers showcasing filament LED bulbs, smart lighting products, and an emphasis on reducing glare in luminaire designs.
Continue reading
2016-04-19

Lextar Showcases Innovative Nonvisible IR LED, Automotive Headlights and UV LEDs at TILS 2016

Lextar’s booth highlighted more advanced lighting technology at the lighting show this year, including several IR LED solutions, automotive lighting and UV LED modules at Taiwan International Lighting Show (TILS) 2016, which took place at Nangang Exhibition Hall from April 12-16, 2016 in Taipei.
Continue reading
2016-04-19

Intertek Offers Decorative LED Christmas Light Testing Services in Taiwan

British test lab Intertek has started to offer decorative LED Christmas light testing services in Taiwan, said company representatives at Taiwan International Lighting Show 2016 (TILS 2016) jointly organized by TAITRA, SEMI and ITRI that took place last week in Nangang Exhibition Hall Center, Taiwan.
Continue reading
2016-04-18

Nanya Photonics and China Electric Focus on Smart Hospital Lighting at TILS 2016

Industrial lighting specialist Nanya Photonics and luminaire manufacturer China Electric (or also known as TOA Lighting) both featured smart LED hospital lighting at the four-day Taiwan International Lighting Show (TILS 2016) that took place in Nangang Exhibition Hall, Taipei from April 12-16, 2016.
Continue reading
2016-04-18

MechaTronix: LED Chip Designs Spur More Efficient Heat Sink Designs in High Power Applications

Miniaturization and rising efficiency in LED chip designs has initiated redesigns in heat sinks, which are becoming more compact and turning to new designs to achieve faster thermal dissipation, said MechaTronix General Manager Koen Vangorp during an interview with LEDinside at Taiwan International Lighting Show 2016 (TILS) that took place recently in Nangang Exhibition Hall, Taipei.
Continue reading

Lumileds introduced the LUXEON MX, a multi-die emitter that delivers industry leading efficiency and flux for outdoor fixtures and high bay lighting applications. Lighting fixtures benefit from the emitter’s 1,200 lumen, 150 lm/W ef... READ MORE

The trading portfolio of IMM Photonics has been expanded in the segment Fabry-Perot laser diodes to include a 830 nanometer (nm) version by the Japanese manufacturer QD-Laser.

READ MORE